Frame for Sanni cartridge reader HW5 Rev3 - FRAME ONLY, NO ELECTRONICS INCLUDED

Description

What you are purchasing
: a 3D-printed PLA frame and LCD cover to fit the Open Source Cartridge Reader (hardware version 5 revision 3).
Pre-labeled with white-on-clear tape.
Comes with M2 screws to attach the electronic components to the frame. It is assumed that your reader was built with the M2 threaded spacers as recommended in the parts list on the project's Github site. M2 spacers are NOT included.
M2 threaded inserts are pre-installed to allow simple attachment of the LCD cover to the frame.
N64 controller socket snaps in on right side of LCD (no parts included)
Printed with Inland PLA filament if you want to look up what the colors look like.
---
Disclaimers:
THIS LISTING IS FOR A 3D-PRINTED FRAME ONLY. THIS DOES NOT COME WITH THE CARTRIDGE READER ITSELF.
PLEASE MAKE SURE YOU HAVE THE HW5 REV3 VERSION OF THE CARTRIDGE READER AS IT WILL NOT FIT OTHER VERSIONS.
NO REFUNDS.
---
I am not affiliated with Sanni, the creator of this project. It is only through their hard work and creativity in designing the OSCR and sharing it with all retro gamers that building these devices is possible. Visit the project's Github site:
https://github.com/sanni/cartreader